2004 Mazda RX-8 Owner's Manual - Page 258

J60E_8R65-EA-03C_Edition2.book Page 33 Saturday, April 26, 2003 1:48 PM Maintenance and Care Owner Maintenance 3. Disconnect the bulb from the socket. Fuses Your vehicle's electrical system is protected by fuses. If any lights, accessories, or controls don't work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible. Socket 4. Install the new bulb in the reverse order of removal. License plate light 1. Press the front of the lens to detach the front tabs. 2. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with a flathead screwdriver. 3. Disconnect the bulb by pulling it out. Edge M Fuse Replacement If the electrical system doesn't work, first inspect fuses on the driver's side. 1. Turn off the ignition switch and other switches. 2. Open the fuse panel cover. Fuse panel cover 4. Install the new bulb in the reverse order of removal. 8-33 Form No. 8R65-EA-03C