1995 Pontiac Bonneville Owner's Manual - Page 81
1995 Pontiac Bonneville Manual
Page 81 highlights
Windshield Wipers The windshield wipers are controlled by turning the band marked WIPIER. For steady wiping at low speed, turn the band away from you to the LO position. For high speed wiping, turn the band further, to HI. To stop the wipers,move the band to OFF. The wiper speed may be set for a long or short delay between wipes. This can be very useful in light rain or snow. Turn the band to choose the delay time. The closer to LO, the shorter the delay. Heavy snow orice can overload your wiper motor. A circuit breaker will stop the matoruntil it cools. Clear away snow or ice to prevent an overload. For a single wiping cycle, turn the band to MIST. Hold you it there until the wipers start, then let go. The wipers will stop after one cycle. If you want more cycles, hold the band on MIST longer. Keep in mind that damaged wiper blades may prevent fromseeing well enough to drive safely. To avoid damage, be sure to clear ice and snow from the wiper blades before using them. If your blades do become damaged, get new blades or blade inserts. 2-32