1997 Pontiac Grand Am Owner's Manual - Page 80

Manual Transaxle Operation Here's howto operate your transaxle: FIRST (1): Press the clutch pedal and shift into FIRST (1). Then, slowly let up on the clutch pedal as you press the accelerator pedal. You can shift into FIRST (1) when you're going less than 20 mph (32 km/h). If you've come to a complete stop and it's hardto shift into FIRST (l),put the shift lever in NEUTRAL (N) andlet up on the clutch. Press the clutch pedal back down. Then shift into FIRST (1). SECOND (2): Press the clutch pedal as you let up on the accelerator pedal and shift into SECOND (2).Then slowly let up on the clutch pedal as you press the accelerator pedal. THIRD (3), FOURTH (4) and FIFTH (5): Shift into THIRD (3), FOURTH (4) and FIFTH ( 5 ) the same way you do for SECOND (2). Slowly let up on the clutch pedal as you press the accelerator pedal. To stop, let up on the accelerator pedal and press the brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal, and shift into NEUTRAL (N). This is your shift pattern. 1 2 w 3 4 5 R NEUTRAL (N): Use this position when you start or idle your engine. 2-25