1997 Pontiac Grand Am Owner's Manual - Page 92

Windshield Wipers Remember that damaged wiper blades may prevent you from seeing well enough to drive safely. avoid To damage, be sureto clear ice and snow from the wiper blades before using them. they're frozen tothe If windshield, carefully loosenor thaw them. If your blades do become damaged, get new blades or blade inserts. Heavy snow or ice can overload your wiper motor. A circuit breaker will stop the motor until it cools. Clear away snow or to prevent an overload. ice Controlled Cycle Wipers (If Equipped) You can set the wiper speed a longor short delay for between wipes. This can be very useful light rain in or snow. You control the windshield wipers by moving the stalk with the wiper symbol on upor down. it For a single wiper cycle, push the stalk down to MIST, then release it. For more cycles, hold the stalk down longer. Move the stalk to DELAY, then rotate the inner band and choose the delay you want. Rotate the inner band up for shorter delay times between wiper cycles. Rotate the band down for a longer delay time between wiper cycles. With controlled cycle wipers, you also use MIST for can For steady wiping at low speed, move the stalk up to thea single wiper cycle. (1) position. For high-speed wiping, move the stalk up further, to (2).To stop the wipers, move the stalk to OFF. 2-37