2003 Pontiac Montana Owner's Manual - Page 169

Before your vehicle was shipped from the factory, it was programmed in Mode 4. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: Automatic Door Locks This feature allows you to customize the automatic locking and unlocking of the doors when using the shift lever. Programmable Modes Mode 1 : Both Features Off (Automatic door locking and unlocking is disabled. You will always need to lock your doors manually before driving to increase occupant safety.) Mode 2: Automatic Door Locking Only The automatic door unlock feature is turned off. Shift out of PARK (P) with the ignition on and the driver's door closed; all doors will lock automatically. Mode 3: Automatic Unlocking with the Ignition Off Turn off the ignition with the transaxle in PARK (P); all doors will unlock automatically. Shift out of PARK (P) with the ignition on and the driver's door closed; all doors will lock automatically. Mode 4: Automatic Unlocking with Transaxle in PARK (P) 0 Shift into PARK (P) with the ignition on; all doors will unlock automatically. 0 Shift out of PARK (P) with the ignition on and the driver's door closed; all doors will lock automatically. 1. Follow the instructions for "Entering Programming Mode'' earlier in this section. 2. Turn the interior lamps on by turning the instrumenr panel brightness control all the way up. 3. Count the number of chimes you hear. The number of chimes indicates the vehicle's current programmed mode. (If you do not wish to change the current mode, you can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.) 4. Turn the interior lamps off to change the current mode. 5. Turn the interior lamps from on to off until you hear the number of chimes corresponding to the mode selection you want. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. 2-62