2003 Pontiac Montana Owner's Manual - Page 27

Make sure the seats are in the full rear position before beginning this procedure. 1. With the seat folded, squeeze the angled bar toward the straight crossbar while placing the front hooks of the bucket seat onto the front two floor pins. 2. Make sure the bucket seat is angled so that the front hooks clear the floor pins. 3. If the front legs are not attached correctly, the rear legs will not attach to the rear set of floor pins. If the front latches are not attaching correctly, check that the seat is in the full rear position. 4. Firmly push the rear hooks onto the rear floor pins by pushing down the rear of the seat. 5. Try to raise the seat to check that it is locked down. 6. Lift the seatback recliner lever or pull the nylon strap on the back of the seat and raise the seatback until it locks upright. 7. Push and pull on the seatback to make sure that it is locked in place. Captain Chairs If your vehicle has the captain's chairs, the seatbacks can be folded forward or reclined and the seats can be removed. 1-20