2003 Pontiac Montana Owner's Manual - Page 18

To recline the seatback, pull the nylon strap or lift the recliner lever. Press back on the seatback until you reach the desired position then let go of the strap or lever. 3. Lift the seatback recliner lever or pull the nylon strap on the back of the seat to fold the seatback forward. 'To return the seatback to an upright position, pull on the nylon strap or lift the recliner lever without putting any pressure on the seatback. Push and pull on the seatback to be sure it is locked into place. 4. If the seat is in the second row, lift one of the adjustment levers and slide the seat fully rearward. Removing the Split Bench Seat Make sure the seatback is in the upright position. 1. For the second row split bench, with the seatback in the upright position, unhook the side attachment for the safety belt. This mini-buckle is located on the right side of the seat. Push the red center of the buckle up with a small pointed object - like a key or a pen - io remove the seat belt, if needed. 5. From behind the bench seat, pull the nylon strap at the center of the base of the seat to release the rear latches from the floor pins. Do not let go of the strap until the seat is folded all the way forward. 1-1'