2003 Pontiac Montana Owner's Manual - Page 34

The stowable seat has seat position labels, located on the backof the seat, showing wherethe seat must go. Follow the floor pin diagram. Use thefront floor pins of the floor cups and the rear floor cups in the third row. A seat that isn't locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock theseat into place properly when installing it. The seat must be placed in the proper location for the legs to attach correctly. Make sure the seat is in its upright position before beginning this procedure. I 1. Place the front hooks of the seat onto the front floor pins in the third row. To do this, the seat will need to be angled so the front hooks clear the floor pins. If the front legs are not attached correctly, the rear legs will not attach to the rear set of floor pins. 2. Firmly push the rear hooks into the rear floor pins by pushing down on the rear of the seat. A safety !It thatisimpropyrouted,not properly attached, or twisted won't provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safetv belts are properly routed and attached, and are not twisted. 3. Try to raise the seat to make sure that it is locked down. 4. Push and pull on the seatback to make sure that it is iocked inio piace. Do not put the stowable seat in so it faces rearward because it will not latch that way. The stowable seat has io go jn before tite con-venierice center* See Convenience Center on gage 2-58 for more information. 1-27