2003 Pontiac Montana Owner's Manual - Page 75

Securing a Child Restraint Designed for the LATCH System _ _ I If a LATCH-type child restrai..- isn't achec its anchorage points, the restraint won't be able to protect a child sitting there.In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraintis properly installed using the anchorage points, or use the vehicle's safety belts to secure the restraint. See "Securing a Child Restraint Designed for the LATCH System" or "Securing a Child Restraint in a Rear Outside Seat Position" in the Index for information on how to secure a child restraint in your vehicle. I 1. Find the anchors for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2. Put the child restraint on the seat. 3. Attach the anchor points on the child restraint to the anchors in the vehicle. The child restraint instructions will show you how. 4. If the child restraint is forward-facing, attach the top strap to the top strap anchor. See Top Strap on page 1-63. Tighten the top strap according to the child restraint instructions. 5. Push and pull the child restraint in different directions to be sure it is secure. To remove the child restraint, simply unhook the top strap from the top tether anchor and then disconnect the anchor points. 1-68