2008 Subaru Tribeca Owner's Manual - Page 265
2008 Subaru Tribeca Manual
Page 265 highlights
Starting and operating 7-31 vehicle reaches the desired speed. The vehicle will maintain the desired speed. Vehicle speed can be temporarily increased while driving with the cruise control activated. Simply depress the accelerator pedal to accelerate the vehicle. When the accelerator pedal is released, the vehicle will return to and maintain the previous cruising speed. position. The " " indicator light in the combination meter goes off when the cruise control is canceled. To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the control lever upward in the "RES/ACC" direction to return to the original cruising speed automatically. " indicator light in the combination The " meter will automatically come on at this time. & To temporarily cancel the cruise control 3. Push the control lever downward in the "SET/COAST" direction and release it. Then release the accelerator pedal. There are three ways to cancel the cruise control temporarily: & To turn off the cruise control There are two ways to turn off the cruise control: . Push the main switch again. . Turn the ignition switch to the "Acc" or "LOCK" position (but only when the vehicle is completely stopped). At this time, the " " indicator light is illuminated in the combination meter. . Pull the control lever in the "CANCEL" direction. . Depress the brake pedal. . Shift the selector lever into the "N" - CONTINUED -