2008 Subaru Tribeca Owner's Manual - Page 369
2008 Subaru Tribeca Manual
Page 369 highlights
Maintenance and service 11-47 & Back-up light/Tail light 2. Turn the bulb socket counterclockwise and remove it. 3. Pull the bulb out of the bulb socket and replace it with a new one. 4. Install the bulb socket by turning it clockwise. Install the light cover on the rear gate. & Rear gate light 1. Use a flat-head screwdriver to remove the light cover from the rear gate trim. 2. Pull the bulb out of the bulb socket and replace it with a new one. 3. Install the rear gate light assembly on the rear gate. & License plate light 1. Use a flat-head screwdriver to remove the rear gate light assembly from the rear gate trim. 1) 2) Tail light Back-up light - CONTINUED -
&
Back-up light/Tail light
1.
Use a flat-head screwdriver to remove
the light cover from the rear gate trim.
1)
Tail light
2)
Back-up light
2.
Turn the bulb socket counterclockwise
and remove it.
3.
Pull the bulb out of the bulb socket and
replace it with a new one.
4.
Install the bulb socket by turning it
clockwise. Install the light cover on the
rear gate.
&
Rear gate light
1.
Use a flat-head screwdriver to remove
the rear gate light assembly from the rear
gate trim.
2.
Pull the bulb out of the bulb socket and
replace it with a new one.
3.
Install the rear gate light assembly on
the rear gate.
&
License plate light
Maintenance and service
11-47
–
CONTINUED
–