2008 Subaru Tribeca Owner's Manual - Page 45

Seat, seatbelt and SRS airbags 1-21 the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving a strong pull on it, then pull it out slowly again. ! Adjusting the shoulder belt anchor height (rear seats of 5-seater models/second-row seats of 7-seater models) 4. To make the lap part tight, pull up on the shoulder belt. 5. Place the lap belt as low as possible on your hips, not on your waist. 3. Insert the tongue plate into the buckle until you hear a click. The shoulder belt anchor height should be adjusted to the position best suited for you. To lower the anchor height, push the release button and slide the anchor down. To raise the anchor height, slide the anchor up. Pull down on the anchor to make sure that it is locked in place. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck. WARNING When wearing the seatbelts, make sure the shoulder portion of the - CONTINUED -