2008 Subaru Tribeca Owner's Manual - Page 366
2008 Subaru Tribeca Manual
Page 366 highlights
11-44 Maintenance and service ! High beam light bulbs 2. Use a screwdriver to remove the secured clip of the washer tank. To make it easy to access the bulb, move the washer tank to the horizontal direction. (left-hand side) place and secure it by clip. (left-hand side) & Parking light (right-hand side) Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. (right-hand side) Left-hand side 3. Disconnect the electrical connector from the bulb. 4. Remove the bulb from the headlight assembly by turning it counterclockwise. 5. Replace the bulb with new one. At this time, use care not to touch the bulb surface. 6. Reconnect the electrical connector. 7. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 8. Install the air intake duct with clips. (right-hand side) 9. Set the washer tank to the original 1. Remove the bulb socket from the headlight assembly by turning it counterclockwise.