2011 Subaru Tribeca Owner's Manual - Page 133
2011 Subaru Tribeca Manual
Page 133 highlights
3-4 Instruments and controls & Acc In this position the electrical accessories (radio, accessory power outlet, etc.) can be used. NOTE The engine may not start in the following cases. contains an immobilizer transponder. . The key is near or touching another transmitter. & ON This is the normal operating position after the engine is started. & Key reminder chime The reminder chime sounds when the driver's door opens and the key is in the "LOCK" or "Acc" positions. The chime stops when the key is removed from the ignition switch. & START CAUTION Do not turn the ignition switch to the "START" position while the engine is running. The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the "ON" position. If your registered key fails to start the engine, pull out the key once (the security indicator light will blink), and then insert the key in the ignition switch and turn it to the "START" position and again try to start the engine. . The key is near another key that & Ignition switch light For easy access to the ignition switch in the dark, the ignition switch light illuminates when the driver's door is opened. The light remains on for several seconds and then gradually turns off after driver's door is closed. Also, the light turns off immediately if the key is turned to the "ON" position. . The key grip is touching another key or a metallic key holder.