2011 Subaru Tribeca Owner's Manual - Page 370

Maintenance and service 11-39 NOTE . If headlight aiming is required, consult your SUBARU dealer for proper adjustment of the headlight aim. . It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. ! Low beam light bulbs (right-hand side) 6. Reconnect the electrical connector. 7. Install the bulb cover with the fixing screws. 8. Install the air intake duct with the clips. NOTE Contact your SUBARU dealer for the bulb replacement of the left-hand side. ! High beam light bulbs 2. Use a screwdriver to remove the bulb cover. 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 3. Disconnect the electrical connector. 4. Remove the retainer spring. 5. Replace the bulb, then set the retainer spring securely. - CONTINUED -