2011 Subaru Tribeca Owner's Manual - Page 67

1-40 Seat, seatbelt and SRS airbags Each lower anchorage is located where the seat cushion meets the seatback. CAUTION When you install a child restraint system, follow the manufacturer's instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased. cushion and seatback a little wider to locate the two anchorages (bars) for the position where you want to install the child restraint system. The tether anchorages (upper anchorages) are provided for all the seating positions of the second-row seat. 3. While following the instructions supplied by the child restraint system manufacturer, connect the lower hooks onto the lower anchorages located at " " marks on the bottom of the seatback. When the hooks are connected, make sure the adjacent seatbelts are not caught. On each outboard rear/second-row seat, you will find marks " " at the bottom of the seatback. 1. Slide the seat or seat pair to its rearmost position. 2. Make the clearance between the seat