2011 Subaru Tribeca Owner's Manual - Page 50
2011 Subaru Tribeca Manual
Page 50 highlights
Seat, seatbelt and SRS airbags 1-23 ! Adjusting the shoulder belt anchor height (second-row seats) WARNING When wearing the seatbelts, make sure the shoulder portion of the webbing does not pass over your neck. If it does, adjust the seatbelt anchor to a lower position. Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision. ! Unfastening the seatbelt NOTE The shoulder belt anchor height should be adjusted to the position best suited for the passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck. To raise: Slide the anchor up. To lower: Push the release button and slide the anchor down. Pull down on the anchor to make sure that it is locked in place. 1) Holder With the seatback folded, attach the tongue plate of each rear/second-row seatbelt to the corresponding holder. Do the same also before someone gets into the third-row seat. Push the button on the buckle. Before closing the door, make sure that the belts are retracted properly to avoid catching the belt webbing in the door. - CONTINUED -