2011 Subaru Tribeca Owner's Manual - Page 314

In case of emergency 9-9 WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 15. Turn the jack handle counterclockwise to lower the vehicle. torque, following the tightening order in the illustration. Never use your foot on the wheel nut wrench or a pipe extension on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. CAUTION There are 2 types of wheel nut wrenches that apply to different lengths. For models with silver-colored aluminum wheels, the 10.8-inch (275 mm) wheel nut wrench is equipped as a maintenance tool. And for models with optional chrome-finished wheels, the 13.2-inch (335 mm) wheel nut wrench is equipped as well. Confirm the equipped wheel nut wrench type when you replace a tire. If the wheel nut wrench is the different type, it cannot be tightened to the specified torque. 1) The length of the wheel nut wrench 16. Confirm the length of the equipped wheel nut wrench and wheel nut tightening torque. Refer to "Tires" F12-4. WARNING Do not use the extension when turning the wheel nuts. If you did, you would not be able to achieve sufficient tightening torque. The wheel nuts could then come loose, resulting in a serious accident. 17. Use the wheel nut wrench to securely tighten the wheel nuts to the specified 18. Store the flat tire in the spare tire - CONTINUED -