2011 Subaru Tribeca Owner's Manual - Page 31

1-4 Seat, seatbelt and SRS airbags To adjust the seat cushion angle, pull up or push down the front end of the control switch. ! Seat height adjustment (driver's seat) . Angle of seatback . Angle of seat cushion . Height of seat ! Registration of seat position WARNING . Never adjust the seat while driving to avoid the possibility of loss of vehicle control and of personal injury. . Before adjusting the seat, make sure the hands and feet of rear seat passengers or luggage are clear of the adjusting mechanism. To adjust the seat height, pull up or push down the rear end of the control switch. 1. With the select lever in the "P" position, adjust the seat position. 2. While pressing the "SET" button, press the desired button "1" or "2". 3. The chime sounds once, and the seat position is registered. ! Retrieval of seat position WARNING . Never retrieve the seat position while driving to avoid the possibility of loss of vehicle control and of personal injury. . Perform the seat position retrieval before driving. Be sure to confirm that the select lever position is in the "P" position. Do not drive until the retrieval of the seat position is complete. & Memory function (driver's seat - if equipped) Two of your favorite seat positions can be registered. Register the seat position with button "1" or "2" and retrieve the seat position by pressing either button. The following seat positions can be registered. . Forward/backward position of the seat