2011 Subaru Tribeca Owner's Manual - Page 374

Maintenance and service 11-43 2. Turn the bulb socket counterclockwise and remove it. 3. Pull the bulb out of the bulb socket and replace it with a new one. 4. Install the bulb socket by turning it clockwise. 5. Install the light cover on the rear gate. 1. Wrap a flat-head screwdriver in vinyl tape or cloth, insert it into the gap between the license plate light assembly and the rear gate. 2. Carefully pry the light assembly to remove it. & Rear gate light 2. Pull the bulb out of the bulb socket and replace it with a new one. 3. Install the rear gate light assembly on the rear gate. & License plate light 3. Remove the bulb socket from the license plate light assembly by turning it counterclockwise. 1. Use a flat-head screwdriver to remove the rear gate light assembly from the rear gate trim. - CONTINUED -