2011 Subaru Tribeca Owner's Manual - Page 52

Seat, seatbelt and SRS airbags 1-25 is heard. Make sure that the " " mark on the connector (tongue) and the " " mark on the buckle are aligned. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 2. Pull out the seatbelt slowly from the overhead retractor. 5. To make the lap part tight, pull up on the shoulder belt. And place the lap belt as low as possible on your hips, not on your waist. ! Unfastening the seatbelt 4. Insert the center seatbelt tongue plate in the center seatbelt buckle marked "CENTER" on the left-hand side until it clicks. 3. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click - CONTINUED -