2011 Subaru Tribeca Owner's Manual - Page 371
2011 Subaru Tribeca Manual
Page 371 highlights
11-40 Maintenance and service Left-hand side 2. Use a screwdriver to remove the secured clip of the washer tank. To make it easy to access the bulb, move the washer tank to the horizontal direction (left-hand side). 3. Disconnect the electrical connector from the bulb. 4. Remove the bulb from the headlight assembly by turning it counterclockwise. 5. Replace the bulb with new one. At this time, use care not to touch the bulb surface. 6. Reconnect the electrical connector. 7. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 8. Install the air intake duct with clips (right-hand side). 9. Set the washer tank to the original place and secure it by clip (left-hand side). headlight assembly by turning it counterclockwise. & Parking light (right-hand side) 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Set the bulb socket into the headlight assembly and turn it clockwise until it locks. NOTE Contact your SUBARU dealer for the bulb replacement of the left-hand side. 1. Remove the bulb socket from the