2007 Suzuki Reno Owner's Manual - Page 170

SERVICE AND APPEARANCE CARE 7) Replace the lamp housing into the vehicle using the two screws removed earlier. 8) Close the liftgate. Backup Lamps and Tail/Stop Lamps License Plate Lamps N4U5029B N4U5045A To replace a license plate lamp bulb: To replace a backup lamp or a tail/stop lamp bulb: 1) Open the liftgate. 2) Remove the protective cover. 3) Remove the bulb socket by turning it counterclockwise. 4) Remove the bulb from the socket by pressing the bulb and turning it counterclockwise. 5) Install the appropriate bulb into the socket. See "Replacement Bulbs" in this section. 6) Replace the bulb socket into the lamp housing. Turn the bulb socket clockwise to secure it. 7) Replace the protective cover and close the liftgate. 1) Remove the two screws shown in the illustration and the lamp cover. 2) To remove the bulb holder from the lamp housing, rotate the bulb holder counterclockwise. 3) Pull the bulb out from the bulb holder. 4) Replace the bulb. See "Replacement Bulbs" in this section for the proper bulb. 5) Install the bulb holder into the lamp housing by rotating the bulb holder clockwise. 6) Replace the lamp cover. 5-26