2007 Suzuki Reno Owner's Manual - Page 33

SEATS AND RESTRAINT SYSTEMS WARNING Each top tether bracket is designed to anchor only one child restraint. Attaching more than one child restraint to a single bracket could cause the anchor to come loose or even break during a crash. A child or others could be injured if this happens. To help prevent injury to people and damage to your vehicle, attach only one child restraint per bracket. S4U1010A In Canada, the law requires that forwardfacing child restraints have a top strap, and that the strap be anchored. In the United States, some child restraints also have a top strap. If your child restraint has a top strap, it should be anchored. Anchor the top strap to an anchor point specified in "Top Strap Anchor Location" in this section. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed. Once you have the top strap anchored, you'll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer's instructions say. N4U1011A Top strap anchors are located at both sides and at the center of the lower rear tail member in the rear cargo area. Pull the front part of the plastic cover downward to access the top strap anchors. Top Strap Anchor Location Top strap anchors are already installed in your vehicle for the three rear seating positions. Do not use a child restraint with a top strap in the right front passenger's position because there is no place to anchor the top strap. Securing a Child Restraint with Top Strap Install the child restraint system as follows: 1) Remove the luggage compartment cover (if equipped). 2) Secure the child restraint on the rear seat using the procedure described in "Securing a Child Restraint in a Rear Seat Position" of this section. 3) Pull the front part of the plastic cover downward to access the top strap anchors. 4) Hook the top strap to the anchor bracket and tighten the top strap 1-21