2007 Suzuki XL7 Owner's Manual - Page 228
2007 Suzuki XL7 Manual
Page 228 highlights
SERVICE AND APPEARANCE CARE Follow this diagram to store the underbody-mounted spare tire. 1) Put the tire (D) on the ground at the rear of the vehicle. 2) Ensure the valve stem is pointed down and to the rear. Then pull the retainer (C) through the wheel. 3) Pull the secondary retainer (C) through the wheel. The secondary retainer is located under the secondary latch spring and is smaller than the spare tire retainer to allow it to fit through the road wheel center cap hole. 4) Place the wheel wrench (A) onto the hoist drive nut. 5) Raise the tire fully against the underside of the vehicle by turning the wheel wrench clockwise. Continue turning it clockwise until you hear two clicks or feel it skip twice. This indicates that the tire is secure and the cable is tight. The spare tire hoist cannot be overtightened. 811589 1218662 A. B. C. D. Wheel Wrench Hoist Shaft Secondary Retainer Spare Tire (Valve Stem Pointed Down) 6) Make sure the tire is stored securely. Push, pull (A), and then try to turn (B) the tire. If the tire moves, use the wheel wrench and socket end of the extension to tighten the cable. 7) Return the equipment to the proper location in the vehicle as shown next. 5-45