ASRock X79 Extreme11 LSI SAS2 Integrated RAID Solution User Guide - Page 35

ADAPTER_NOT_FOUND: Cannot find specified adapter.

Page 35 highlights

SAS2 Integrated RAID Solution User Guide Appendix A: | Commands Program Return Value A.3.3 DELETE Command Command Line Parameters Program Return Value A.3.4 DISPLAY Command Command Line Parameters Program Return Value 0x00 0x01 0x02 SUCCESS: Command completed successfully. FAILURE: Bad command-line arguments or operational failure. ADAPTER_NOT_FOUND: Cannot find specified adapter. The DELETE command deletes all of the Integrated RAID volumes and hot spare drives from the specified LSI SAS2 controller. The command does not change any other controller configuration parameters. sas2ircu delete [noprompt]  - The index of the controller with the volume(s) that you want to delete.  noprompt - This optional parameter prevents warnings and prompts from appearing while the command is running. 0x00 0x01 0x02 SUCCESS: Command completed successfully. FAILURE: Bad command-line arguments or operational failure. ADAPTER_NOT_FOUND: Cannot find specified adapter. The DISPLAY command displays information about LSI SAS2 controller configurations, including controller type, firmware version, BIOS version, volume information, physical drive information, and enclosure. See the following Sample Output example. The physical device information section displays the duplicate device of a dual-port SAS drive. sas2ircu display [filename]  - The index of the controller for which you want to display information.  [filename] - An optional valid filename to store the command output to a file. 0x00 0x01 0x02 SUCCESS: Command completed successfully. FAILURE: Bad command-line arguments or operational failure. ADAPTER_NOT_FOUND: Cannot find specified adapter. LSI Corporation Confidential | August 2010 Page 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

SAS2 Integrated RAID Solution User Guide
Appendix A:
|
Commands
LSI Corporation Confidential
|
August 2010
Page 35
Program Return Value
0x00
SUCCESS: Command completed successfully.
0x01
FAILURE: Bad command-line arguments or operational failure.
0x02
ADAPTER_NOT_FOUND: Cannot find specified adapter.
A.3.3
DELETE Command
The DELETE command deletes all of the Integrated RAID volumes and hot spare drives
from the specified LSI SAS2 controller. The command does not change any other
controller configuration parameters.
Command Line
sas2ircu <
controller_#
> delete [noprompt]
Parameters
<
controller_#
>
– The index of the controller with the volume(s) that you want
to delete.
noprompt
– This optional parameter prevents warnings and prompts from
appearing while the command is running.
Program Return Value
0x00
SUCCESS: Command completed successfully.
0x01
FAILURE: Bad command-line arguments or operational failure.
0x02
ADAPTER_NOT_FOUND: Cannot find specified adapter.
A.3.4
DISPLAY Command
The DISPLAY command displays information about LSI SAS2 controller configurations,
including controller type, firmware version, BIOS version, volume information, physical
drive information, and enclosure. See the following Sample Output example.
The physical device information section displays the duplicate device of a dual-port
SAS drive.
Command Line
sas2ircu <
controller_#
> display [
filename
]
Parameters
<
controller_#
>
– The index of the controller for which you want to
display information.
[
filename
]
– An optional valid filename to store the command output to a file.
Program Return Value
0x00
SUCCESS: Command completed successfully.
0x01
FAILURE: Bad command-line arguments or operational failure.
0x02
ADAPTER_NOT_FOUND: Cannot find specified adapter.