Acer AT350 F1 User Manual - Page 106

94 4 System BIOS If the User Password is installed, the following items will display. Parameter Description Options User Access Level (Available when a Supervisor Password is set) Select Full Access to grant the user (supervisor) a full read and write access to the Setup Utility. Select View Only to allow the user (supervisor) to access the Setup Utility without making changes to the fi elds. Select Limited to allow the user (supervisor) to access and make changes to limited fi elds such as Date and Time. Select No Access to prevent the user (supervisor) from accessing the Setup Utility. Full Access View Only No Access Limited Change User Password Select this feature and press to access the submenu. Then enter a new user Password. Password Check This item allows you to check a password after it has been entered. Select Setup for the system to check the password at Setup. Select Always for the system to check the password at bootup. Setup Always Boot Sector Virus Protection When enabled, the AMI BIOS displays a warning when any program (or virus) issues a Disk Format command or attempts to write to the boot sector of the hard disk drive. The options are Enabled and Disabled. BIOS Write Protect Select Enabled to prevent the user from writing data into the BIOS Setup Utility. The options are Enabled and Disabled. Clear Case Open Status This feature will clear the status log which indicates "case-open." TCG/TPM (Trusted Platform Module) Support Select Yes on this item and enable the TPM jumper on the motherboard to enable TCG (TPM 1.1/1.2)/TPM support to improve data integrity and network security. The options are No and Yes.