Acer AT350 F1 User Manual - Page 65
Upgrading the system memory, System memory interface
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
53 Upgrading the system memory System memory interface The server has a total of eighteen DIMM slots. Each CPU controls three channels and each channel has three slots. The DIMM slots support DDR3-1333 registered/unbuffered ECC memory modules. For single rank and dual rank RDIMM, a maximum of three DIMMs per channel or a total of 18 DIMMs can be supported. For UDIMM and quad rank RDIMM, the server only supports two DIMMs per channel or a maximum of 12 DIMMs. In each channel, the slot farthest from the CPU is slot A (1A, 2A and 3A in blue) while the nearest one is slot C (1C, 2C and 3C in black). Independent mode • For all memory modes, slot A in each channel should be populated first and then slot B. If slot A is empty, then slots B and C cannot be used. • For a single-processor server configuration, install the processor in CPU1 socket and the memory modules in slots P1DIMM 1A to P1DIMM 3C. • If there is a processor installed in CPU2 socket, the system will enable the slots P2DIMM 1A to P2DIMM 3C.