Acer AT350 F1 User Manual - Page 94
USB Configuration, USB Mass Storage Device Configuration
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
82 USB Configuration 4 System BIOS Parameter Description Options USB Controller Select Enabled to enable the onboard USB controller. Enabled Disabled Legacy USB Support (Available when USB Functions is not Disabled) Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB support will be automatically enabled if a legacy USB device is installed on the motherboard. Enabled Disabled Auto USB 2.0 Controller This item indicates if the onboard USB 2.0 controller is activated. Enabled Disabled USB 2.0 Controller Mode This setting allows you to select USB 2.0 Controller mode. Hi-Speed (480 Mbps) Full Speed (12 Mbps) USB Mass Storage Device Configuration This feature allows the user to configure the USB Mass Storage Device Settings. Parameter USB Mass Storage Reset Delay Device#1 Description Options This setting allows you to decide how long the system should wait in an attempt to detect the presence of a USB Mass Storage Device before it issues a start command the system to proceed with the next operation during POST. 10 seconds 20 seconds 30 seconds 40 seconds This setting allows the BIOS to display the USB Device#1 detected in the system.