Acer AT350 F1 User Manual - Page 134
MegaRAID SAS 8708EM2 RAID Creation, Saving and Exiting the RAID Configuration Utility
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
122 Appendix A Server management tools 5 Select Yes and the selected drive changes from READY to HOTSP. 6 Press to return to the Management Menu. Saving and Exiting the RAID Configuration Utility 1 After performing RAID configuration, initialization and assigning the hot spare disk, press in the Management Menu and select Yes to exit the RAID Configuration Utility. 2 Press + + to reboot the server. 3 Now you can start to install the operating system. MegaRAID SAS 8708EM2 RAID Creation Configuring MegaRAID SAS 8708EM2 This section briefly shows how to create RAID with MegaRAID SAS 8708EM2. Entering MegaRAID SAS RAID Configuration Utility To start MegaRAID SAS RAID Configuration Utility for MegaRAID SAS 8708EM2, press + when you see the RAID BIOS during POST. After POST finished, the Adapter Selection page will show on the screen. Click on Start to launch the configuration menu. Loading Factory Default Setting 1 In the Configuration menu, select Adapter Properties. The current adapter settings appear. Click on Next to change the setting. 2 Change the setting of Set Factory Defaults from No to Yes then click on submit. 3 Press + + to reboot the server. Creating a RAID Volume 1 Launch the configuration menu. 2 Select Configuration Wizard 3 Select Add Configuration (default) and click on Next. 4 Select Custom Configuration (default) and click on Next.