Acer AT350 F1 User Manual - Page 64
both the HSF assembly and the processor socket retention
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
52 3 System upgrades keyed in such a way that you cannot install the processor in the wrong orientation without bending the pins. (2) Hold the processor by its edges then insert it in the socket. (3) Close the retention plate. (4) Engage the load lever back in place and secure the load lever under the load lever retention tab . 8 Apply the thermal interface material. (a) Use an alcohol pad to wipe off the old thermal grease from both the HSF assembly and the processor socket retention plate. (b) Apply a thin layer of thermal interface material before installing the HSF. Make sure that only a very thin layer is applied so that both contact surfaces are still visible. 9 Install the heatsink fan assembly (see "Installing the heatsink and fan assembly" on page 48). 10 Observe the post-installation instructions described on page 27.