Acer AT350 F1 User Manual - Page 95
PCI/PnP Configuration
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
83 Parameter Emulation Type Description If set to Auto, USB devices that are smaller than 530MB will be emulated as floppy and the remaining will be emulated as an HDD. The Forced FDD option will allow you to confi gure an HDD formatted drive to boot as an FDD (eg. Zip Drive). Options Auto Floppy Forced FDD Hard Disk CD ROM PCI/PnP Configuration Parameter Description Options Plug & Play OS Select Yes to allow the OS to Yes configure Plug & Play devices. (This is No not required for system boot if your OS supports Plug & Play.) Select No to allow the AMI BIOS to confi gure all devices in the system. SR-IOV Supported Select Enabled to enable Single-Root I/O Virtualization (SR-IOV) support, which works in conjunction with the Intel Virtualization Technology to allow multiple operating systems to run simultaneously within a single computer via natively shared PCIExpress devices in order to enhance network connectivity and performance. Enabled Disabled PCI-U Slot0 Option ROM/ PCI-E Slot2 Option ROM~PCI-E Slot6 Option ROM Select Enabled to enable Option ROM support for the user to boot computer using a network interface from the slots specified above. Enabled Disabled Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot the computer using a network interface. Enabled Disabled