Acer AT350 F1 User Manual - Page 89
ATA Controller Configuration
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
77 Parameter Clock Spread Spectrum Description Options Select Enable to enable Clock Spectrum support, which will allow the BIOS to monitor and attempt to reduce the level of Electromagnetic Interference caused by the components whenever needed. Enabled Disabled ATA Controller Configuration When this submenu is selected, the AMI BIOS automatically detects the presence of IDE or SATA devices and displays the following items. Parameter Description Options SATA#1 Configuration Select Compatible to set SATA#1 to legacy compatibility mode. Select Enhanced to set SATA#1 to native SATA mode. Compatible Disabled, Enhanced Configure SATA#1 as This feature allows the user to select the drive type for SATA#1. IDE RAID AHCI ICH RAID CodeBase (Available when the option-RAID is selected.) Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID settings. Select Adaptec to enable Adaptec's SATA RAID firmware to configure Adaptec's SATA RAID settings. Intel Adaptec SATA#2 Configuration (Available when the option IDE is selected.) Select Enhanced to set SATA#2 to native SATA mode. Enhanced Disabled SATA PORT0~ SATA PORT5 These settings allow the user to set the parameters of the slots indicated above. Press to activate the following submenu. Set the correct confi gurations accordingly. The items included in the submenu are listed below.