Acer AT350 F1 User Manual - Page 110

98 Console Redirection 4 System BIOS Parameter Description Options Console Redirection Select Enabled to use Console Redirection for remote access. If Remote Access is set to Enabled, the following items will display. Enabled Disabled Serial Port Number This feature allows the user to decide which serial port to be used for Console Redirection. COM1 COM2 Base Address, IRQ This item displays the base address and IRQ of the serial port used for Console Redirection. The default setting is 2F8h, 3. Serial Port Mode This feature allows the user to set the serial port mode for Console Redirection. 115200 8, n 1 57600 8, n, 1 38400 8, n, 1 9200 8, n, 1 9600 8, n, 1 Flow Control This feature allows the user to set the flow control for Console Redirection. None Hardware Software Redirection After BIOS POST Select Disabled to turn off Console Redirection after Power-On Self-Test (POST). Select Always to keep Console Redirection active all the time after POST. (Note: This setting may not be supported by some operating systems.) Select Boot Loader to keep Console Redirection active during POST and Boot up. Disabled Boot Loader Always Terminal Type This feature allows the user to select the target terminal type for Console Redirection. ANSI VT100 VT-UTF8 VT-UTF8 Combo Key Support Select Enabled to enable VT-UTF8 Combination Key support for ANSI/ VT100 terminals. Enabled Disabled