Acer AT350 F1 User Manual - Page 55
to their connectors on, the main board.
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
43 8 Insert the new 5.25-inch storage device with brackets into the bay (1). The drive is properly inserted if you hear a click and the locking tab locks into place. 9 Connect the power (2) and SATA cables (3) to their connectors on the main board. 10 Re-install the side panel and close the bezel door. 11 Observe the post-installation instructions described on page 27.
43
8
Insert the new 5.25-inch storage device with brackets into the
bay (
1
).
The drive is properly inserted if you hear a click and the
locking tab locks into place.
9
Connect the power (
2
) and SATA cables (
3
) to their connectors on
the main board.
10
Re-install the side panel and close the bezel door.
11
Observe the post-installation instructions described on page 27.