Acer AT350 F1 User Manual - Page 93
Serial Port Configuration
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
81 Parameter S.M.A.R.T. 32Bit Data Transfer IDE Detect Timeout (sec) Description Options Self-Monitoring Analysis and Reporting Technology (SMART) can help predict impending drive failures. Select Auto to allow the AMI BIOS to automatically detect hard disk drive support. Select Disabled to prevent the AMI BIOS from using S.M.A.R.T. Select Enabled to allow the AMI BIOS to use S.M.A.R.T. to support the hard-drive disk. Auto, Disabled, Enabled, Select Enable to enable the function of 32-bit IDE data transfer. Enabled Disabled Use this feature to set the timeout value for the BIOS to detect the ATA, ATAPI devices installed in the system. 0 (sec), 5, 10, 15, 20, 25, 30, 35 Serial Port Configuration Parameter Serial Port 1 Address Serial Port 2 Address Serial Port 2 Attribute Description Options This feature allows the user to specify the base I/O port address and the Interrupt Request address for Serial Port 1 or Serial Port 2. Select Disabled to prevent the serial port from accessing system resources. When this option is set to Disabled, the serial port will become physically unavailable. Select 3F8/ IRQ4 to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3, 2F8/IRQ3 Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4 Select COM to configure the onboard COM 2 port as a normal serial port. Select SOL (Serial Over_LAN) to confi gure the onboard COM 2 port as a virtual COM port for SOL use. SOL COM