Acer AT350 F1 User Manual - Page 96
Advanced Chipset Control, CPU Bridge Configuration
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
84 4 System BIOS Parameter Onboard LAN Option ROM Select Boots Graphic Adapter Boot Priority Description Select iSCSI to use iSCSI Option ROMs to boot the computer using a network device. Select iSCSI to use PXE Option ROMs to boot the computer using a network device. This feature allows the user to select the graphics adapter to be used as the primary boot device. Options PXE iSCSI Onboard VGA Add-on VGA Advanced Chipset Control This submenu is used to configure the following sub-items: CPU Bridge Configuration Parameter QPI Links Speed Description This feature selects QPI's data transfer speed. QPI Frequency (Available if QPI Links Speed is set to Full Speed) This feature is used to select the desired QPI frequency. QPI L0s and L1 Memory Frequency Select Enabled to lower the QPI power state. L0s and L1 are automatically selected by the motherboard. Use this feature to force a DDR3 memory module to run at a frequency other than what the system has detected. Options Slow-mode Full Speed Auto 4.800 GT 5.866GT 6.400 GT Enabled Disabled Auto, Force DDR800, Force DDR1066, Force DDR1333, and Force SPD