Acer AT350 F1 User Manual - Page 76
Installing an expansion card
View all Acer AT350 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
64 3 System upgrades Installing an expansion card I/O interface The AT350 F1 has six PCI bus slots with separate bus segments, namely: • Two PCI Express® 2.0 x8 in x16 (slots 4 and 6) • Two PCI Express® 2.0 x4 in x8 (slots 2 and 3) • One PCI Express® 1.0 x4 in x8 (slot 5) • One PCI Express® 2.0 x8 (slot 0 - Flex IO) Installing a SAS card 1 Observe the pre-installation instructions on page 26. 2 Remove the side panel described on page 28. 3 If necessary, remove any cables that prevent access to the PCI slot. 4 Locate an empty expansion slot that is compatible with the specification of the card you intend to install. 5 Unclip the restraining latch (1) and open in the direction (2) shown below . 6 Remove the screw holding the slot in place (3). 7 Slide out the slot shield (4).