Alpine INE-W977HD Owners Manual - Page 21

Adjusting Bass Level/Treble Level Bass Level and Treble Level can be set independently set for Front and Rear speakers by touching [Front] or [Rear]. Setting item: Bass / Treble Setting contents: -14 to +14 (Initial setting: 0) • When "BASS ENGINE SQ" is selected in the Shortcut Setup, this setting is disabled. • Adjustment cannot be performed when Defeat is set to "On." • The Bass adjusted setting value is interlinked with Band2 of Dual HD EQ, and the Treble adjusted setting value is interlinked with Band8. Setting the BASS ENGINE SQ Setting the BASS ENGINE Type Creating the ideal Bass impact for your musical taste using BASS ENGINE SQ. Setting contents: Standard (Initial setting) / Punch / Rich / Mid Bass / Low Bass Standard: Mild low-end boost with mid-range focus for frontcenter staging. Punch: Mid-bass punched up with mid-range impact. Rich: Accented highs and mid-bass giving outstanding balance for all types of music. Mid Bass: Strong high frequency emphasis with mid-bass boost for more low-end attack. Low Bass: Strong, low-bass boost with extended highs for a very dynamic sound. Adjusting the BASS ENGINE Level You can adjust the BASS ENGINE Level. Setting item: BASS ENGINE Level Setting contents: 0 to 6 (Initial setting: 3) • The BASS ENGINE Level 0 of the BASS ENGINE SQ is common to all the types. About setup when the external power amplifier is connected In order to optimize the BASS ENGINE SQ mode, we recommend the following procedure to set up the power amplifier. Use your favorite music to make the following amplifier adjustment. 1) Set GAIN of the power amplifier to "MIN." 2) Set the Crossover Mode Selector switch to "OFF." • If the switch has no "OFF" position, set as near as possible to full range. 3) Set the BASS ENGINE Level to "03." 4) Play a song of the genre you frequently listen to, and adjust GAIN of the power amplifier. Rear Seat Entertainment Function The Rear Seat Entertainment function independently routes different sources to the front and the rear side of the car. For example, while listening to the radio or other audio sources in the front, HDMI can be enjoyed at the rear with optional rear monitors and headphones. Rear Seat Entertainment System Setup screen Button for changing to the Sound Setup screen. Visual source selection area that is displayed on the Rear monitor.*1 Touch the source icon displayed on the Rear monitor. Front: The image and sound of the same visual source as the unit are output. Off: Stops output to the Rear monitor. Illumination Color button The color coordination select button of the Rear monitor: White/Blue/Green/Amber/Red/Purple/Skyblue/Off (This function is depended on Over Head Monitor) Plasmacluster air volume adjustment button*2 Whenever you touch the button, you can change the air volume. Off Low Mid High Off • While the plasmacluster is operating, the indicator is displayed on the Audio source screen. Remote Sensor You can set whether the sensor on Rear monitor receives remote control operation, or the unit receives it. *1 The visual source that can be output to the Rear monitor is "HDMI/ DVD," and "AUX." When the unit plays back the visual source, you can only select the same visual source as the unit. *2 When the Plasmacluster in "Setting the Rear Seat Entertainment System" (page 50) is set to "Off," the Plasmacluster air volume adjustment button is not displayed. • If the same visual source is being output to both the unit and the Rear monitor when an incoming/outgoing call is made, the visual/audio output to the Rear monitor is interrupted temporarily depending on the source. If different visual sources are being output to the unit and the Rear monitor, visual/audio output to the Rear monitor continues without interrupting playback. 21-EN