Alpine INE-W977HD Owners Manual - Page 47
Camera Setup, Setting the Camera Input, Switching Video Source for Multi View Camera
View all Alpine INE-W977HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3 Touch [ ] to return to the main source screen. • To return to the previous List screen, touch [ ] or [ ] in the previous page. For details, see "About Basic Operation for List Screen" (page 19). Camera Setup [Camera] is selected on the System Setup Menu screen in step 1. See "System Setup" (page 46). You can set up items related to the Camera. Setting the Camera Input Setting item: Camera Select Setting contents: Off (Initial setting) / Front / Rear / Other / Camera Selector Front: Front camera Rear: Rear camera Other: Side camera, Room camera, etc. Camera Selector*: Front Camera/Rear Camera/Side Camera connected to the optional Multi Camera Interface module. * When selecting Camera Selector, you can set the Front Camera/Rear Camera/Side Camera to On/Off. For details, see "Setting Multi Camera to On/Off" (page 49). Setting the Camera Signal Input When the camera is connected, the video input signal type can be chosen. Further setting item: Camera Signal Setting contents: NTSC (Initial setting) / PAL Switching Video Source for Multi View Camera The video source can be changed when connected to Multi View Camera. When Camera Select is set to "Off " or "Other," you cannot select this item. Setting item: Guide Adjustment 1 Touch [Guide Adjustment]. The camera guide adjustment screen is displayed. Multi View compatible Side Camera 2 Touch [Front] or [Rear]. The view will change to the selected view. Multi View compatible Front Camera/Rear Camera 2 Touch [Back], [Panorama], [Corner], or [Top]. The view will change to the selected view. • [Back] will not appear for the Front camera. • For an explanation of video patterns, see the camera Owner's Manual. Adjusting the Rear/Front/Side Camera Guide You can adjust the camera guide position. Setting item: Guide Adjustment 1 Touch [Guide Adjustment]. The camera guide adjustment screen is displayed. • If the video pattern is set to "Corner (Rear/Front Camera only)," the camera guide will not be displayed. • When you connect a Multi View compatible camera, select a Video Pattern to make a guide adjustment. • To adjust the guide position of the Rear Camera, touch [Hitch Guide On] or [Hitch Guide Off] to display/hide the Hitch Guide. You can adjust the Hitch Guide to mark the position of the junction between your vehicle and your trailer. • When you connect a Multi View compatible Side Camera, after selecting the Video Pattern, touch [ ] (Left steering) or [ ] (Right steering) to make the guide adjustment that matches the position of the steering wheel in your vehicle. 2 Touch [Adjust]. • If [Adjust] does not appear, proceed to step 3. 3 Touch the guide you intend to adjust. Guide line can also be selected by touching [ ] [ ]. Rear Camera screen example When Hitch Guide is set to Off • You cannot adjust the position of the yellow guide line " " in the center independently. It is controlled by a system to be the center of the two yellow guide lines " " and " " on the left and right, or the central green line " " and red guide line " ". When Hitch Guide is set to On • You can adjust the Hitch Guide to mark the position of the junction between your vehicle and your trailer. 47-EN