Alpine INE-W977HD Owners Manual - Page 80
HDMI Operation
View all Alpine INE-W977HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
HDMI Operation Screen example when the HDMI Setup is "HDMI 1" WARNING It is dangerous for the driver to watch the HDMI image while driving the vehicle. The driver may be distracted from looking ahead and an accident may occur. Install the unit correctly so that the driver cannot watch the HDMI image unless the vehicle is stopped and the emergency brake is applied. If the unit is not installed correctly, the driver will be able to watch the HDMI image while driving the vehicle and may be distracted causing an accident. The driver or other people may be severely injured. iPhone, Smartphone, etc. The output of your electronic device will be mirrored on this unit through the HDMI connector. Control from this unit is not possible. • The electronic device must possess an HDMI output interface. • Not all devices with an HDMI output interface can be recognised by this unit. • Use only the Alpine Special HDMI connection cable. 1 Press the (AUDIO) button to select HDMI mode. The display shows the HDMI mode screen. • You can select and change the source in the Menu screen (page 22) or Favorite screen (page 25). • For your safety, video is not displayed and only audio can be heard while driving. 2 In HDMI player mode, the screen of the device displays the content of electronic equipment by mirror image. Touch [ ] (HDMI 2). The HDMI source changes to HDMI 2, and the Function button changes to [ ] (HDMI 1). Each time you touch [ ] (HDMI 1)* or [ ] (HDMI 2), the HDMI source changes. * When HDMI Setup is "DVD," the Function button is changed to [ ] (DVD). You can select Display Mode. For details, see "Switching Display Modes (During Video File Play Back)" (page 59). • You cannot operate them while driving. Switching the source when two HDMI devices are connected You can switch the source only when you have connected the HDMI selector and "Setting the HDMI Selector On/Off " (page 50) is set to "On." 80-EN