Alpine INE-W977HD Owners Manual - Page 72

System Setup Switching the Bar Color Select the colors (8) used for highlighting items in the System Setup screen. Setting items: Bar Color Setting contents: Blue / Green / Light blue / Amber (Initial setting) / Aqua blue / Yellow / Red / White Setting the TV Screen Mode Setting item: TV Screen Aspect Setting contents: 16:9 (Initial setting) / 4:3LB / 4:3PS • For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc's jacket.) • You can also switch the TV Screen mode by touching [ ] (Display Mode) on the display of this unit. For details, see "Switching Display Modes (During Video File Play Back)" (page 59). 4:3 LETTER BOX: Select this when connected to an older, 4:3 aspect ratio, TV monitor. There may be black stripes visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie. 4:3 PAN-SCAN: Select this when connected to an older, 4:3 aspect ratio, TV monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie). 16:9 WIDE: Select this when connected to a wide screen TV. This is the factory setting. Delaying Image Output Use this function when an external audio processor is connected. Depending on the connected audio processor, the audio and image currently played back may not be output at the same time. In this case, you can output an image delayed by 0.1 second by setting to On. Setting item: Video Delay Setting contents: Off (Initial setting) / On On: Output image is delayed by 0.1 second. • If a disc with a high compression rate is played back, the image and audio may be distorted. Returning to the Initial Setting You can return the contents you previously set to the initial factory settings. Setting item: Setup Initialize Setting contents: Yes / No (Initial setting) Yes: Returns to the initial setting. No: Does not returns to the initial setting. DVD Contents Setup Setting the language The audio language, subtitle language and menu language can be set according to your preferences. Once set, this becomes the default language. This function is convenient when you always want to listen in English. (Not all discs allow changing the default language. If not, the factory default language applies.) Setting item: Languages Setting contents: Audio / Subtitle / Menu Audio: Set the audio track language. Subtitle: Set the language of the subtitles displayed on the screen. Menu: Set the language used for the menus (title menu, etc.). Further Setting contents: Auto (Initial setting) / Off (Subtitle only) / English / French / Japanese / Italian / German / Swedish / Spanish / Chinese / Russian / Others Auto: The disc is played with the audio language or subtitle language set as the priority language for the disc. Off: Subtitles are not displayed. (Subtitle only) Others: Set this to play the disc with a language other than one of the languages displayed. Touch [Enter], then use the numeric keypad ("0" to "9") to input the 4-digit language code. Then touch [Enter] again. For the language codes, refer to "List of Language Codes" (page 105). • If you change the language setting when the disc is in the unit, the setting is decided with one of the following operations. - Disc eject. - Turn OFF the main unit. - Switch the source on the head unit. • To temporarily change the language of the current disc, either do so from the DVD menu or using the operation described in the section "Switching the Audio Tracks" (page 79). • If the disc does not include the selected language, the disc's default language is set. 72-EN