Alpine INE-W977HD Owners Manual - Page 30
Setup, Setup Operation
View all Alpine INE-W977HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setup Setup Operation To display the Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Release the parking brake. (For safety, release the parking brake while depressing the foot brake pedal). 3 Engage the parking brake again. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the Setup operation has been released. Engaging the parking brake can reactivate the Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the Setup Menu screen." Each time the ignition is turned OFF, perform the procedure of "To display the Setup Menu screen." 1 Press the MENU button. The Menu screen is displayed. • You can also display the menu screen by touching the lower part of the Audio source screen or by swiping upward. 3 Touch the required setting icon on the upper part of the Setup main screen or swipe the list area vertically, then touch the setting item. Setting items: Wireless: See "Wireless (Bluetooth) Setup" (page 31). General: See "General Setup" (page 33). Source: See "Source Setup" (page 43). System: See "System Setup" (page 46). [Setup] button 2 Touch [Setup]. The Setup main screen is displayed. 30-EN