Alpine INE-W977HD Owners Manual - Page 49
Setting Multi Camera to On/Off, Factory System Setup, Setting the Source Category
View all Alpine INE-W977HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Setting Multi Camera to On/Off When connecting the optional Multi Camera Interface module, you can connect up to 3 cameras as Front Camera/Rear Camera/Side Camera. • When using the optional Multi Camera Interface module, select "Camera Selector" to set the "Front Camera /Rear Camera/Side Camera" to "On" ( )/"Off " ( ). Setting item: Front Camera / Rear Camera / Side Camera / Default Camera* Setting contents: Off (Initial setting) / On Camera Signal: See "Setting the Camera Signal Input" (page 47) Guide See "Adjusting the Rear/Front/Side Camera Guide" Adjustment: (page 47) Camera See "Camera Interrupt Setting (Power OFF Mode) (Rear Interrupt Camera Only)" (page 48) (Power Mode): * You can change the Default Camera only when you set more than one camera for Front Camera/Rear Camera/Side Camera to "On." For details, see "Setting a Default Camera" (page 49). Setting a Default Camera When connecting an optional Multi View Camera, you can set which camera image is displayed when you touch the Camera button on the Menu screen or press the (CAMERA) button (X209D only). Setting item: Default Camera Setting contents: Front / Rear / Side • The initial setting differs depending on the cameras set to "On" in "Setting Multi Camera to On/Off." Setting the Source Category You can set whether the following source icon in the Menu screen is available. Setting item: USB/iPod (Initial setting: Both) / SiriusXM (Initial setting: Aftermarket) Setting contents: Both / Factory / Aftermarket Both*: Factory: Aftermarket: Both the sources listed above from this unit and iDataLink module are available. Only the source listed above from iDataLink module is available. Only the source listed above from this unit is available. * USB/iPod only. • The iDataLink source icons not displayed on the Menu screen when no iDataLink module is connected even though "Both" or "Factory" is set. • You cannot set the source that is currently being played. Setting the Default Vehicle Screen Press and hold the (Favorite) button for at least 2 seconds or touch the Menu screen (page 22) to display the Info mode screen, and then set the following. Setting item: Default Vehicle Screen Setting contents: Climate / Vehicle Info. / Gauges / Parking Assist / Last mode (Initial setting) • Depending on the car, some setting contents or this setting item may not be displayed. Setting the Maestro Module You can change the setting of the connected iDataLink module. Setting item: Maestro Module • Depending on the iDataLink module, the setting contents may differ. Factory System Setup [Factory System Setup] is selected on the System Setup Menu screen in step 1. See "System Setup" (page 46). 49-EN