Bose Lifestyle 38 Operating guide - Page 30
TV Power, TV Power Status, TV Aspect Ratio, Widescreen DVDs, Video Connector, Video Black Level, - installation manual
View all Bose Lifestyle 38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English Español Français Controlling External Sources Figure 10 Changing the TV Power 7. Set the TV to turn on automatically*, as needed: • Move up to the System menu categories and over to Video. • From the Video options, select TV Power (Figure 10). • Move right into the list of choices and up or down to select one of the two below: - Automatic (for TV models that do not use a European style SCART connector) - Euro Connector (for TV models that use a SCART connector) • Press the Enter button. Video TV Power: TV Power Status: TV Aspect Ratio: Widescreen DVDs: Video Connector: Video Black Level: Manual TV Not Detected - - Component Normal The Media Center can turn your TV on automatically whenever you select a video source. navigate select 8. Notice the TV Power Status: • TV Detected means the installed TV sensor is working. • TV Not Detected means the TV sensor (if installed) is not positioned properly, or a SCART connector is installed. • Press System or Exit to leave the System menu. Note: For information and on using the TV sensor, refer to "Installing the TV on/off sensor" in your Install Guide.To check for positioning of the sensor, refer to "The media center" on page 14. *For the Automatic feature to work effectively with North American TV models, the optional TV sensor must be installed and positioned to detect if the TV is on or off. In Europe, a SCART connector serves this purpose. If you do not use a SCART connector, or the TV sensor is not positioned properly, the automatic feature is not an option. In that case, leave the TV Power set to Manual. This means you must turn your TV on using its power button or with the LIFESTYLE® remote (when it is set to do so). 30