Brother International CS-8072 Users Manual - English - Page 15

Setting the bobbin, ward you to cut off any excess thread.

Get Brother International CS-8072 PDF manuals and user guides View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

CONTENTS BEFORE USE SEWING UTILITY STITCHES Setting the bobbin CAUTION Setting the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury. 1 Wound evenly 2 Wound poorly 1 2 1 1. Slide open the bobbin cover. 1 Bobbin cover 2 Bobbin cover release button 2 2. Insert the bobbin into the shuttle with the thread direction as shown in the diagram. CAUTION Be sure the bobbin is set so the thread unrolls in the correct direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or the needle to break. 3. Guide the thread end through the slit, then pull the thread toward you to cut off any excess thread. 1 1 Built-in thread cutter 4. Close the bobbin cover by placing the left end in place and pressing down lightly on the right end so that it snaps into place. 1 2 * You can begin sewing immediately without drawing up the bob- bin thread. MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
12
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES
MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
1
2
Setting the bobbin
1.
Slide open the bobbin cover.
1
Bobbin cover
2
Bobbin cover release button
2.
Insert the bobbin into the shuttle with the thread direction as
shown in the diagram.
3.
Guide the thread end through the slit, then pull the thread to-
ward you to cut off any excess thread.
1
Built-in thread cutter
4.
Close the bobbin cover by placing the left end in place and
pressing down lightly on the right end so that it snaps into
place.
*
You can begin sewing immediately without drawing up the bob-
bin thread.
1
2
1
CAUTION
Setting the bobbin improperly may cause the thread tension to
loosen, breaking the needle and resulting in injury.
1
Wound evenly
2
Wound poorly
1
2
CAUTION
Be sure the bobbin is set so the thread unrolls in the
correct direction. If the thread unrolls in the wrong
direction, it may cause the thread tension to be
incorrect or the needle to break.