Brother International CS-8072 Users Manual - English - Page 58

FLAT FELL SEAM, sew the edge of the fold.

Get Brother International CS-8072 PDF manuals and user guides View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

CONTENTS BEFORE USE SEWING FLAT FELL SEAM 2 J For reinforcing seams and neatly finishing edges 1. Attach presser foot "J". Sew the seam line, then cut half of the seam allowance from the side that the flat fell seam will lie against. 1 About 12 mm (1/2") 2 Wrong side of fabric 2. Spread out the fabric along the finish line. 1 Finish line 2 Wrong side of fabric 3. Lay both seam allowances to the shorter one's (cut one) side and iron them. 1 Wrong side of fabric 4. Fold the longer seam allowance around the shorter one, and sew the edge of the fold. 1 Wrong side of fabric * Flat-fell seam can be on the inside or outside. For example for denim jeans, jackets, etc., seam is on the outside, rather than inside as shown above. UTILITY STITCHES MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
55
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES
MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
FLAT FELL SEAM
1.
Attach presser foot “J”. Sew the seam line, then cut half of the
seam allowance from the side that the flat fell seam will lie
against.
1
About 12 mm (1/2")
2
Wrong side of fabric
2.
Spread out the fabric along the finish line.
1
Finish line
2
Wrong side of fabric
3.
Lay both seam allowances to the shorter one’s (cut one) side
and iron them.
1
Wrong side of fabric
4.
Fold the longer seam allowance around the shorter one, and
sew the edge of the fold.
1
Wrong side of fabric
*
Flat-fell seam can be on the inside or outside. For example for
denim jeans, jackets, etc., seam is on the outside, rather than
inside as shown above.
For reinforcing seams and neatly finishing edges
2
J