Brother International CS-8072 Users Manual - English - Page 70

MAINTENANCE, CLEANING THE MACHINE, Cleaning the operation panel, Cleaning the race and shuttle

Get Brother International CS-8072 PDF manuals and user guides View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

CONTENTS BEFORE USE MAINTENANCE CLEANING THE MACHINE CAUTION Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Cleaning the operation panel If the operation panel is dirty, gently wipe it with a soft, dry cloth. Do not use organic solvents or detergents. Cleaning the machine casing If the surface of the machine is dirty, lightly soak a cloth in a neutral detergent, squeeze it out firmly and then wipe the surface. Then wipe again with a dry cloth. Cleaning the race and shuttle If dust or bits of dirt collect in the race or shuttle, the machine will not run well. Keep the machine clean for best results. 5 6 1. Turn off the power. Remove the presser foot holder and the needle. SEWING UTILITY STITCHES MAINTENANCE SEWING CHART 5 6 1 1 2 2. Loosen the screws with the disc-shaped screwdriver and remove the needle plate. 1 Needle plate 3. Turn the balance wheel, and align the notch of shuttle a little to the left of the shelf of race, as shown. CAUTION Be sure to turn the balance wheel towards the front of the machine. Turning the balance wheel in the other direction may damage the machine. 1 Notch of shuttle 2 Shelf of race PATTERNS (PROGRAMMED IN MACHINE) 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
67
5
6
If the operation panel is dirty, gently wipe it with a soft, dry cloth. Do not use organic solvents or detergents.
Cleaning the operation panel
If the surface of the machine is dirty, lightly soak a cloth in a neutral detergent, squeeze it out firmly and then
wipe the surface. Then wipe again with a dry cloth.
Cleaning the machine casing
If dust or bits of dirt collect in the race or shuttle, the machine will not run well. Keep the machine clean for best
results.
Cleaning the race and shuttle
CLEANING THE MACHINE
MAINTENANCE
6
1
5
CAUTION
Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may
result.
1.
Turn off the power. Remove the presser foot
holder and the needle.
2.
Loosen the screws with the disc-shaped screw-
driver and remove the needle plate.
1
Needle plate
3.
Turn the balance wheel, and align the notch of
shuttle a little to the left of the shelf of race, as
shown.
CAUTION
Be sure to turn the balance wheel towards the
front of the machine. Turning the balance
wheel in the other direction may damage the
machine.
1
Notch of shuttle
2
Shelf of race
1
2
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES
MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)