Brother International CS-8072 Users Manual - English - Page 68
The needle threader can not be used. Thread the twin nee, Types of thread
View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
CONTENTS BEFORE USE SEWING UTILITY STITCHES 4. Set the extra spool pin into the hole on the end of the bobbin winder shaft on the top of the machine. Follow the instructions 1 for single-needle threading. 1 Extra spool pin for right needle threading. 2 Push the spool pin securely into place. 2 5. Do not set the thread in the needle clamp thread guide on the 5 needle bar. Thread the needle on the right side. 6 Caution The needle threader can not be used. Thread the twin needle by hand, from front to back. Using the needle threader may result in damage to the machine. CAUTION Stitch width Adjust the stitch width. Turn the balance wheel to check the needle does not touch the needle plate. If the needle hit the needle plate the needle may break and cause injury. Stitch length • Straight 2 mm min. • Others 0.5 mm min. Types of thread Cotton thread or spun thread are recommended because synthetic threads may break. MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 65