Brother International CS-8072 Users Manual - English - Page 48

Odd shaped buttons/Buttons that do not fit into the button holder plate, move any slack

Get Brother International CS-8072 PDF manuals and user guides View all Brother International CS-8072 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

CONTENTS BEFORE USE SEWING 3. Once sewing is completed, gently pull the gimp thread to remove any slack, and trim off any excess. * After using the seam ripper to cut open the threads over the buttonhole, trim off the threads. Odd shaped buttons/Buttons that do not fit into the button holder plate 2 1 3 4 Use the markings on the presser foot scale to set the size of the buttonhole. One mark on the presser foot scale equals 5 mm (3/ 16''). Add together the button diameter and its thickness, and then set the plate at the calculated value 1 Presser foot scale 2 Button holder plate 3 Completed measurement of diameter + thickness 4 5 mm (3/16'') Example: For a button with a diameter of 15 mm (9/16''), a thickness of 10 mm (3/8''), the scale should be set at 25 mm (1''). 1 1 10 mm (3/8'') 2 15 mm (9/16'') 2 UTILITY STITCHES MAINTENANCE SEWING CHART PATTERNS (PROGRAMMED IN MACHINE) 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
45
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES
MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
Odd shaped buttons/Buttons that do not fit into the button holder plate
Use the markings on the presser foot scale to set the size of the
buttonhole. One mark on the presser foot scale equals 5 mm (3/
16'').
Add together the button diameter and its thickness, and then set
the plate at the calculated value
1
Presser foot scale
2
Button holder plate
3
Completed measurement of diameter + thickness
4
5 mm (3/16'')
Example:
For a button with a diameter of 15 mm (9/16''), a thickness of 10
mm (3/8''), the scale should be set at 25 mm (1'').
3.
Once sewing is completed, gently pull the gimp thread to re-
move any slack, and trim off any excess.
*
After using the seam ripper to cut open the threads over the
buttonhole, trim off the threads.
1
4
3
2
1
10 mm (3/8'')
2
15 mm (9/16'')
1
2